Extensions & Spareparts
Here you find useful extensions to enhance and upgrade your MTS devices.
We also put all the replacement parts in this section.
| Show 1 to 20 (of in total 28 products) | Sites: 1 2 [next >>] |
Bosch LSU4.2 5-wire, wide-band O2 sensorStandard sensor shipping with LM-2 and LC-1
79,00 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
Exhaust clamp for O2 sensorPatent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines. Pushing the O2 sensor into the tail pipe, without this exhaust clamp, does not deliver correct results 75,00 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
Bung & Plug, mild steelAccepting the O2 sensor, to be welded into the exhaust system. NOT stainless, 1" long. (1 pc. comes with each LM-2 and LC-1)
8,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
Bung & Plug Extended (1 inch) Stainless SteelBung & Plug Extended (1 inch) Stainless Steel 10,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
Bung & Plug, mild steelAccepting the O2 sensor, to be welded into the exhaust system. NOT stainless, 1" long. (1 pc. comes with each LM-2 and LC-1)
9,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
Inductive pickup clampInductive pickup clamp, for RPM pickup at ignition cable.
32,00 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
12mm to 18mm Motorcycle Bung Adapter34,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
Bung & Plug, mild steelAccepting the O2 sensor, to be welded into the exhaust system. NOT stainless, 1" long. (1 pc. comes with each LM-2 and LC-1)
9,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
LM-2 USB cable6,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
LM-2 / DL-32 SD card 2GBMemory card for LM-2 or DL-32. SD 2GB required for data recording without PC 9,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
LM-2 patch cable to MTS devicesTo connect the LM-2 to any Innovate MTS device (e.g. LMA-3, SSI-4, TC-4, DL32 etc.) 13,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
Sensorcable for LM-2, MTX-L 18ftExtended sensor cable 18ft, to connect the O² Sensor to the LMA-2 69,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
Sensorcable for LM-2, 8ftStandard sensor cable 8ft, to connect the O² Sensor to the LMA-2 43,00 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
LM-2 OBD-II CableTo connect the LM-2 to the vehicles OBD-II port. (As Included in the LM-2 Complete Kit) 5 1/2 ft
24,89 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
LM-2 Analog/RPM In/Out cableAnalog Input and Output Accessory Cable for LM-2 (Needed for RPM Input).and also for output of AFR signal to feed ino ECUs 24,89 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
LM-2 power cable 12 VLM-2 power cable with cig lighter plug 15,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
LM-2 Carrying caseCase for secure transport and protection of your LM-2. (Shipping without any Tools) 59,00 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
Window Mount for LM-2High Quality window mount for LM-2 49,00 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
Cable Daisy Chain MTS short, 6 inchThis custom cable will allow you to connect and/or daisy chain the following products: XD-16, LC-1, LMA-3, DL-32, SSI-4, TC-4, & ST-12. 6 inch short 13,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
Cable Daisy Chain MTS long, 2.5ftThis custom cable will allow you to connect and/or daisy chain the following products: XD-16, LC-1, LMA-3, DL-32, SSI-4, TC-4, & ST-12. 2.5 ft. long 13,90 EUR ( 19 % VAT incl. excl. Shipping costs ) Shipping time: 3-4 Days |
| Show 1 to 20 (of in total 28 products) | Sites: 1 2 [next >>] |

