DL-32 Datalogger

The DL-32 is a complete vehicle-mounted data-logging system for advanced engine tuning. The system is anchored by Innovate's award-winning digital wideband air/fuel ratio technology, but also includes flexiblke sensors for RPM, MAP, temperature, duty cycle, and analog inputs.

The basic DL-32 unit features the following:

- 32 Channels of data recording, 12 samples per second

- 17 minutes of recording per MB of SD card capacity

- Horespower and torque calculation

- 1-bar to 3-bar pressure sensor ( MAP, Vacuum, Bost, ect. )

- Thermocouple amplifier ( EGT, CHT, ect. )

- Duty cycle (dwell) sensor, or frequency

- 2-axis accelerometer (acceleration Gs, braking Gs, and cornering Gs )

- Ignition timing sensor, RPM converter,

- 5V power supply for external sensors

The DL-32 is a compliant MTS component, so users can chain together additional MTS components, such as Innvate's popular LC-1 wideband oxygen-sensor controller and air/fuel ratio meter. ( for connecting to the LM-1 you do need cable #3759 ) For RPM the DL-32 includes options for direct tach input, inductive clamp, GMR sensor, or optical sensors.

For manifold absolute pressure, the DL-32 features a configurable 1-bar, or 3-bar pressure sensor for both normally-aspirated and forced induction applications. Multiple temperature, frequency and duty cycle channels round out the input capabilities of the DL-32. The DL-32 features 3 programmable solenoid/relay outputs that can be used to drive options like enrichment fuel injectors, water/alcohol pumps, CIS frequency valves, nitrous safety switches, turbo wastegate controllers, and more.

We recommend these accessories:

Inductive pickup clamp Inductive pickup clamp, for RPM pickup at ignition cable. Can be used with LM-2, DL-32, LMA-3 (adapter cable included)   32,00 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days

High quality pressure sensor, to be used for oil- or fuelpressur High quality pressure sensor, to be used for oil- or fuelpressure. 124,00 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days

Speed Sensor Inductive speed sensor, to be used with DL-32, LMA-3, SSI-4, LM-2 can be used to pickup speed signals from driveshaft or any other rotating assembly. 89,90 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days

Therocouple wire (typ K) 1.8m Thermocouple wire to be used with DL-32, LMA-3, TC-4 7,90 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days

MAP Sensor Range  : -30"Hg vacuum to 30psi boost ( 0 to 3bar absolute ) Great for boost gauges, ECUs, data loggers, etc. 54,00 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days

Fluid & Air temperature Sensor 69,00 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days

Customers who bought this product also bought the following products:

TC-4 Thermocouple interface The TC-4 is a 4-channel thermocouple amplifier with two temperature ranges for exhaust gas temperature (EGT) or cylinder head temperature (CHT). 139,00 EUR (19 % VAT incl. excl. Shipping costs)

Exhaust clamp for O2 sensor Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines. Pushing the O2 sensor into the tail pipe, without this exhaust clamp,  does not deliver correct results 75,00 EUR (19 % VAT incl. excl. Shipping costs)

Window Mount for LM-2 High Quality window mount for LM-2 49,00 EUR (19 % VAT incl. excl. Shipping costs)

LM-2 / DL-32 SD card 2GB Memory card for LM-2 or DL-32. SD 2GB required for data recording without PC 9,90 EUR (19 % VAT incl. excl. Shipping costs)

Sensorcable for LM-2, MTX-L 18ft Extended sensor cable 18ft, to connect the O² Sensor to the LMA-2 69,90 EUR (19 % VAT incl. excl. Shipping costs)

LM-2 Analog/RPM In/Out cable Analog Input and Output Accessory Cable for LM-2 (Needed for RPM Input).and also for output of AFR signal to feed ino ECUs 24,89 EUR (19 % VAT incl. excl. Shipping costs)