The new LM-2 "Basic" Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide.
Note: The LM-2 "Basic" Kit out of the box only includes accessories to display your Air/Fuel Ratio either on the meter and/or on your PC. To log RPM, or to Output the wideband signal to an external device you'll need the LM-2 Analog IN/OUT Cable optional accessory. For OBD-II features you'll need the LM-2 OBD-II Cable optional accessory. To record internally to your LM-2 you'll need the SD Card optional accessory. This LM-2 unit also comes in a cardboard box, the black hardcase is an optional accessory LM-2 Carrying Case.
• Innovate “Direct Digital” Wideband Measurement Circuit
• LM-2 can be conneted to any other Innovate device an log any data aquired by these devices.
• As Basic Kit Single Version Available only !
For dual Version please choose the Complete Kit.
• OBD-II Scan tool- read and clear trouble codes, and log OBD-II channels
• Log directly to SD card (card optional)
• Playback log data on screen or with powerful analysis software LogWorks 3.0
• High-contrast graphics LCD
• Built-in RPM converter (inductive clamp or direct frequency)
• 4 fully-differential analog inputs (0-5V DC)
• 2 configurable analog outputs
• Positive lock connectors for all connections
• Innovate MTS serial in and out
• USB connection
We recommend these accessories:
 |
Window Mount for LM-2High Quality window mount for LM-2 49,00 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
LM-2 Carrying caseCase for secure transport and protection of your LM-2. (Shipping without any Tools) 59,00 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
Sensorcable for LM-2, MTX-L 18ftExtended sensor cable 18ft, to connect the O² Sensor to the LMA-2 69,90 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
Sensorcable for LM-2, 8ftStandard sensor cable 8ft, to connect the O² Sensor to the LMA-2 43,00 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
LM-2 OBD-II CableTo connect the LM-2 to the vehicles OBD-II port. (As Included in the LM-2 Complete Kit) 5 1/2 ft
24,89 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
LM-2 patch cable to MTS devicesTo connect the LM-2 to any Innovate MTS device (e.g. LMA-3, SSI-4, TC-4, DL32 etc.) 13,90 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
LM-2 Analog/RPM In/Out cableAnalog Input and Output Accessory Cable for LM-2 (Needed for RPM Input).and also for output of AFR signal to feed ino ECUs 24,89 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
LM-2 power cable 12 VLM-2 power cable with cig lighter plug 15,90 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
Inductive pickup clampInductive pickup clamp, for RPM pickup at ignition cable.
32,00 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
Bosch LSU4.2 5-wire, wide-band O2 sensorStandard sensor shipping with LM-2 and LC-1
79,00 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
Bung & Plug, mild steelAccepting the O2 sensor, to be welded into the exhaust system. NOT stainless, 1" long. (1 pc. comes with each LM-2 and LC-1)
9,90 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
Exhaust clamp for O2 sensorPatent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines. Pushing the O2 sensor into the tail pipe, without this exhaust clamp, does not deliver correct results 75,00 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
Bung & Plug Extended (1 inch) Stainless SteelBung & Plug Extended (1 inch) Stainless Steel 10,90 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
Bung & Plug, mild steelAccepting the O2 sensor, to be welded into the exhaust system. NOT stainless, 1" long. (1 pc. comes with each LM-2 and LC-1)
8,90 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
|
Bung & Plug, mild steelAccepting the O2 sensor, to be welded into the exhaust system. NOT stainless, 1" long. (1 pc. comes with each LM-2 and LC-1)
9,90 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
 |
12mm to 18mm Motorcycle Bung Adapter34,90 EUR ( 19 % VAT incl. excl. Shipping costs ) 3-4 Days |
Customers who bought this product also bought the following products:
|
Bung & Plug, mild steelAccepting the O2 sensor, to be welded into the exhaust system. NOT stainless, 1" long. (1 pc. comes with each LM-2 and LC-1) 9,90 EUR (19 % VAT incl. excl. Shipping costs) |
 |
LM-2 USB cable6,90 EUR (19 % VAT incl. excl. Shipping costs) |
|
LM-2 OBD-II CableTo connect the LM-2 to the vehicles OBD-II port. (As Included in the LM-2 Complete Kit) 5 1/2 ft
24,89 EUR (19 % VAT incl. excl. Shipping costs)
|
|
LM-2 patch cable to MTS devicesTo connect the LM-2 to any Innovate MTS device (e.g. LMA-3, SSI-4, TC-4, DL32 etc.) 13,90 EUR (19 % VAT incl. excl. Shipping costs) |
 |
LM-2 / DL-32 SD card 2GBMemory card for LM-2 or DL-32. SD 2GB required for data recording without PC 9,90 EUR (19 % VAT incl. excl. Shipping costs) |
|
Bung & Plug, mild steelAccepting the O2 sensor, to be welded into the exhaust system. NOT stainless, 1" long. (1 pc. comes with each LM-2 and LC-1) 8,90 EUR (19 % VAT incl. excl. Shipping costs) |
This Product was added to our catalogue on Tuesday 28 December, 2010.